Audio Technica VM95E Moving Magnet Stereo Cartridge Stylus For LP Vinyl Record Player Turntable Phonograph Hi-Fi Accessories
Note: Each ink cartridge needle is packaged in a transparent plastic box
AT-VM95E
VM95 series Elliptical stereo cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response
VM95 Series – Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
AT-VMN95C
AT-VMN95E
AT-VMN95EN
AT-VMN95ML
AT-VMN95SH
AT-VMN95SP
AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
- The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
- VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
- Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
- The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
- The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7
ATN-XP5
ATN-XP3
Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.
No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.
| Cartridge & Stylus | |
| Frequency Response | 20 – 22,000 Hz |
| Channel Separation | 20 dB (1 kHz) |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force | 1.8 to 2.2g (2.0g standard) |
| Stylus Construction | Bonded Round Shank |
| Recommended Load Impedance | 47,000 Ω |
| Coil Impedance | 3.3 kΩ (1 kHz) |
| DC Resistance | 485 Ω |
| Coil Inductance | 550 mH (1 kHz) |
| Output Voltage | 4.0 mV (@ 1 kHz, 5 cm/sec) |
| Output Channel Balance | 2.0 dB (1 kHz) |
| Stylus Shape | Elliptical |
| Cantilever | Aluminium Pipe |
| Static Compliance | 17 x 10 – 6 cm / dyne |
| Dynamic Compliance | 7 x 10 – 6 cm / dyne (100 Hz) |
| Mounting | 1/2” centres |
| Cartridge Weight | 6.1g |
| Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) |
| Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers |
| Model | AT-VM95E |
| Recommended Load Capacitance | 100-200 pF |
| Replacement Stylus | AT-VMN95E |
| Stylus Size | 0.3 x 0.7 mil |
| Type | VM Stereo Dual Magnet |
| Wire Used for Coil | T.P. Copper |













j***n –
Mooi product van een goed merk klinkt super zoals ik al had verwacht goede kwaliteit voor een betaalbare prijs. snelle levering.
B***r –
acabo de regular o peso, a tangência e o Azimute. também tive de alinhar o aparelho pois minha mesa está irregular. depois desse preparo, coloquei pra tocar. o som é excelente, dos graves aos agudos. precisa de caixa de som boa pra sentir de verdade o som dessa capsula. testei também com fone de ouvido akg. mesma coisa, som ótimo. pode comprar sem medo, eu sou exigente com som e fiquei satisfeito com a compra. nunca se esqueça de fazer o mesmo que eu, regule seu toca discos depois de instalar essa cápsula. no mais recomendo a todos.
Customer –
Excellent trader super fast shipping good product very happy
П***н –
Картридж с иглой по всей видимости оригинальный. После замены штатной головки AT3600, звук реально преобразился. Появились прозрачные высокие, ушла зажатость. Низкие стали немного другого характера. В целом звуковая сцена стала шире, масштабнее и глубже. Покупкой доволен. Рекомендую к приобретению. Продавцу спасибо за товар, и отличную упаковку!
I***c –
Excelente! recomendo!
К***ч –
Пришел в исправной упаковке. Поставил вместо JVC Z-1S. Описать звук не сумею. Работает. Особой разницы не услышал.
S***e –
Installed today and am happy with quality of playback. Bass is crisp and richer. Mid range is fuller. However there is a little bit of hum through my system which was not there before. Maybe because the higher quality styles and cassette are showing the limitations of my cheap phono stage…….
W***a –
Super
Customer –
Shipped and delivered quickly. Minimal package without accessories, generic box. Cartridge is the real one! Sounds perfect as it should. If one don’t need fancy box and screwdriver then this is a good opportunity!